跳到主要內容區

系所成員

  1. 首頁
  2. 系所成員
  3. 退休教師
  4. 郭昌宏

郭昌宏

郭昌宏教授

郭昌宏 Chang-Hung Kuo

土木工程學系退休教授

退休時間 2026 年 2 月
領域專長 Computational Mechanics、Tribology、Micromechanics、Metal Fatigue、Computer Modeling of Materials、Dynamics of Structures
Google Scholar

學經歷

學歷

  • Ph.D., Northwestern University
  • M.S., National Taiwan University
  • B.S., National Cheng Kung University

經歷

  • Professor, National Chi Nan University, 2014–2026
  • Associate Professor, National Chi Nan University, 1998–2014
  • Chairman, Department of Applied Materials and Optoelectronic Engineering, 2009–2010
  • Library Director, National Chi Nan University, 2000–2004
  • Member of Technical Staff, Rockwell Science Center, 1997–1998
  • Research Associate, Center for Engineering Tribology, Northwestern University, 1993–1997

教學課程

  • Statics
  • Dynamics
  • Elasticity
  • Advanced Engineering Mathematics（I）
  • Finite Element Method
  • Advanced Finite Element
  • Computation Materials Science
  • Engineering Mathematics（I）、（II）
  • Numerical Analysis
  • Dynamics of Structures
  • Mechanical Behavior of Materials
  • Micromechanics

研究與興趣

  • Computational Mechanics
  • Tribology
  • Micromechanics
  • Metal Fatigue
  • Computer Modeling of Materials
  • Dynamics of Structures

榮譽

  • Marquis Who's Who in the World, 2010–2021
  • Marquis Who's Who in Science and Engineering, 2011–2014
  • Marquis Who's Who in Asia, 2012
  • 國立暨南國際大學教學貢獻獎，101 學年度
  • 傑出教學助理指導教師（靜力學），101 學年度

國內外期刊

  1. M. Wu, J. W. Rudnicki, C. H. Kuo and L. M. Keer, “Surface Deformation and Energy Release Rates for Constant Stress Drop Slip Zones in an Elastic Half-Space,” Journal of Geophysical Research, Vol. 96, pp. 16509–16524, 1991.
  2. W. Lin, C. H. Kuo and L. M. Keer, “Analysis of a Transversely Isotropic Halfspace under Normal and Tangential Loadings,” ASME Journal of Tribology, Vol. 113, pp. 335–338, 1991.
  3. L. M. Keer and C. H. Kuo, “Cracking in a Loaded, Brittle Elastic Half-Space,” International Journal of Solids and Structures, Vol. 29, pp. 1819–1826, 1992.
  4. C. H. Kuo and L. M. Keer, “Contact Stress Analysis of a Layered Transversely Isotropic Half-Space,” ASME Journal of Tribology, Vol. 114, pp. 253–262, 1992.
  5. C. H. Kuo, L. M. Keer and R. K. Steele, “Simulation of the Vertical Split Head Failure in Rails,” International Journal of Solids and Structures, Vol. 30, pp. 2177–2197, 1993.
  6. C. H. Kuo, L. M. Keer and R. D. Cordes, “A Note on Line Spring Solutions for a Part-Through Crack,” International Journal of Fracture, Vol. 72, 1995.
  7. C. H. Kuo, L. M. Keer and M. P. Bujold, “Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue,” ASME Journal of Tribology, Vol. 119, pp. 385–390, 1997.
  8. C. H. Kuo, “Stress Disturbances Caused by the Inhomogeneity in an Elastic Half-Space Subjected to Contact Loading,” International Journal of Solids and Structures, Vol. 44, pp. 860–873, 2007.
  9. C. H. Kuo, “Contact Stress Analysis of an Elastic Half-Plane Containing Multiple Inclusions,” International Journal of Solids and Structures, Vol. 45, pp. 4562–4573, 2008.
  10. C. H. Kuo, “Boundary Element Methods for Contact Analysis,” Encyclopedia of Tribology, Springer, 2013.
  11. C. H. Kuo, “Elastic Field due to an Edge Dislocation in a Multilayered Composite,” International Journal of Solids and Structures, Vol. 51, pp. 1421–1433, 2014.
  12. C. H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” Key Engineering Materials, Vol. 642, pp. 248–252, 2015.
  13. S. Kotšmíd, C. H. Kuo and P. Beno, “Determination of Critical Load in a Nonuniform Circular Steel Column under the Eccentric Axial Load,” Mathematical Problems in Engineering, 2016.
  14. S. Kotšmíd, C. H. Kuo and P. Beňo, “Buckling Loads for Steel Tube with Flattened Ends,” Archive of Applied Mechanics, Vol. 87, No. 6, pp. 949–960, 2017.
  15. C. H. Kuo, S. F. Lim and H. R. Ho, “Cyclic Deformation Caused by Repeatedly Contact Loading,” Applied Mechanics and Materials, Vol. 883, pp. 8–15, 2018.
  16. C. H. Kuo, “Elasto-Plastic Contact Stress Analysis of Hardened Elements under Repeated Contact Loading,” Key Engineering Materials, Vol. 823, pp. 91–96, 2019.

國內外研討會

  1. “Interpretation of Coseismic Surface Deformation Data Using Three Dimensional Crack Models,” NSF／USGS Workshop on Crustal Deformation Measurement and Earthquake Mechanics, Monterey, California, 1990.
  2. “Modeling of Coseismic Surface Deformation Using Non-Kinematic Approach,” 85th Annual Meeting of the Seismological Society of America, Santa Cruz, California, 1990.
  3. “Cracking in a Loaded, Brittle Elastic Half-Space,” George Hermann Anniversary Symposium, San Diego, 1991.
  4. “Contact Stress Analysis of a Layered Transversely Isotropic Half-Space,” ASME／STLE Tribology Conference, 1991.
  5. “Three-Dimensional Analysis of Cracking in a Multi-Layered Composite,” ASME-EMD Meeting, 1993.
  6. “Effect of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue,” ASME／STLE Tribology Conference, 1996.
  7. C. H. Kuo, “A Boundary Element Method for the Three-Dimensional Fracture Analysis of Multiple Cracking in Structural Materials,” 八十八年電子計算機於土木水利工程應用研討會。
  8. 郭昌宏，〈邊界元素法應用於接觸問題分析〉，The Third Workshop on Boundary Element Methods, Integral Equations and Related Topics in Taiwan, 2012。
  9. C. H. Kuo, “Analytical Modeling of Reciprocating Contacts due to Fretting,” 1st Conference on Tribology Technology of Taiwan, 2013.
  10. C. H. Kuo, “Elastic-Plastic Analysis of Fretting Contacts,” International Conference on Engineering Tribology Technology, 2014.

專書

  • C. H. Kuo, Tribology—Lubricants and Lubrication, InTech, October 2011.

執行計畫

科技部計畫

  • 含異質內含物和多孔隙結構鋼材之彈塑性分析，2021/08/01–2022/07/31。
  • 表面硬化滾滑動接觸元件抗磨耗性質之解析模型，2017/08/01–2019/01/31。
  • 表面硬化鋼材在反覆滾滑動接觸下之彈塑性變形研究，2016/08/01–2018/01/31。
  • 以微觀機械模型研究尺度效應對於微動疲勞破壞之影響，2015/08/01–2017/01/31。
  • 微動引起之接觸疲勞破壞研究，2014/08/01–2016/01/31。
  • 滾滑動接觸元件因微動引起之循環塑性變形和磨耗機制研究，2013/08/01–2014/10/31。
  • 機械關鍵零組件表面工程基礎研究中心，2013/01/01–2014/07/31。
  • 表面鍍膜在循環接觸應力作用下之抗磨耗機制研究，2011/08/01–2013/01/31。
  • 碳鋼在反覆滾滑動接觸下之循環塑性變形研究，2009/08/01–2011/01/31。
  • 多尺度模擬應用於薄膜材料機械及磨潤性質之研究，2006/08/01–2007/07/31。
  • 類鑽碳薄膜材料磨潤性質和破壞機制之解析模型建立，2003/08/01–2004/07/31。
  • 實際工程表面之三維微接觸應力及疲勞破壞分析，2001/08/01–2003/07/31。
  • 國立暨南國際大學科技學院大樓結構數值模型之建立和耐震評估，2000/08/01–2001/07/31。
  • 接觸疲勞解析模型之建立與電腦模擬，1999/08/01–2000/07/31。

大專生研究計畫

  • 張琪棉：風力發電機結構分析設計研究，2015/07/01–2016/02/28。
  • 紀佩瑩：無元素葛勒金法應用於二維接觸應力分析，2013/07/01–2014/02/28。